Printed Circuit Board, PCB, PCB Board manufacturer / supplier in China, offering PCB for LED Base Board for Holding Light Source, Chips, PCBA (PCB Board Assembly) for Car DVR, PCB Manufacture, Components Sourcing, Assembly One Stop PCB Assembly and so on.
Xinchenger Electronics is a professional manufacturer of high-tech products who can offer you rogers4003 rf pcb inverter pcb board quick turn service with competitive price. Just be free to buy good rogers4003 rf pcb inverter pcb board quick turn service at reasonable price with us and get the datasheet from our suppliers who can working for you.
Detailed Product Description
Base Material:Rogers 4003
Product Name:Electronic Pcb/2K*4K Android Quad Core Motherboard/PCB Prototype/Electronic Circuit Board
Number Of Layers:8-Layer
Copper Thickness:Inner 1/2 Oz-4oz;Outer 1oz-5oz
Board Thickness:Mechanical Drill: 8mil(0.2mm)
Surface Finishing:HASL/HASL Lead Free/immersion Gold/ENIG
Min. Line Width:0.075mm(3mil)
Min. Line Spacing:0.1mm(4mil)
Min. Hole Size:0.1mm(4mil)
Rogers High Frequency PCB:China Rogers Printed Circuit Board
Service:One Stop Turnkey Service
Testing Service:X-Ray/AOI X-Ray Function Test/Omron AOI/Solder Paste Testing
Rogers4003 RF PCB Inverter Pcb Board Quick Turn Service
|Rogers||RO5880||0.254 0.508 0.762||2.20 ± 0.02|
RO4350B materials are proprietary woven glass reinforced hydrocarbon/ceramics with electrical performance close to PTFE/woven glass and the manufacturability of epoxy/ glass.
Providing tight control on dielectric constant and low loss while utilizing the same processing method as standard epoxy/glass, RO4350B is available at a fraction of the cost of conventional microwave laminates. No special through-hole treatments or handling procedures are required as with PTFE based microwave materials.
RO4350B materials are UL 94V-0 rated for active devices and high power RF designs.
RO4003 (r = 3.38) and RO4350 (r = 3.48) is the same material for the commercial market development. Woven fiberglass body is immersed in a ceramic plus thermoplastic resin to form a rigid and temperature stable laminate, electrical characteristics suitable for microwave frequencies. Mechanical properties of this material is similar to FR4, can use ordinary FR4 production processing technology, in combination with prepreg RO4403, can make plywood. RO4350 material for the needs UL94V0 grade applications. Compared with the price RO3000 series, RO4000 low-cost microwave circuit applications selective superior.
RT/duroid 5880 high frequency laminates are PTFE composites reinforced with glass microfibers.The randomly oriented microfibers result in exceptional dielectric constant uniformity.
The dielectric constant of these high frequency laminates is the lowest of all products, and low dielectric loss make them well suited for high frequency/ broad band applications where dispersion and losses need to be minimized. Because of its extremely low water absorption characteristics, RT/duroid 5880 laminates are ideal for applications in high moisture environments.
RT/duroid 5880 laminates are easily cut, sheared and machined to shape, and resistant to all solvents and reagents normally used in etching printed circuits or plating edges and holes. RT/duroid 5870 and 5880 laminates have the lowest electrical loss of any reinforced PTFE material, low moisture absorption, are isotropic, and have uniform electrical properties over frequency.
RT/duroid 6002 microwave materials are a low dielectric constant laminate offering electrical and mechanical properties essential in designing complex microwave structures which are mechanically reliable and electrically stable.
The thermal coefficient of dielectric constant is extremely low from -55oC to+150oC (-67°F to 302°F) which provides the designers of filters, oscillators and delay lines the electrical stability needed in demanding applications.
1. PCB factory directly
2. PCB Have the comprehensive quality control system
3. PCB good price
4. PCB quick turn delivery time from 48hours
5. PCB certification(ISO/UL E354810/RoHS)
6. 12 years experience in exporting service
7. PCB is no MOQ/MOV.
8. PCB is high quality.Strict through theAOI(Automated Optical Inspection),QA/QC,fly porbe ,Etesting