PCB Assembly, PCB Board, PCB manufacturer / supplier in China, offering Competitive PCB for Hoverboard with Ce RoHS, Impedance Controlled PCB Printed Circuit Board with UL, High Quality LED PCB Flex Circuit and so on.
Xinchenger Electronics is a professional manufacturer of high-tech products who can offer you multi-layer hf rogers pcb sufficient material for automotive device 1oz double layer pcb with competitive price. Just be free to buy good multi-layer hf rogers pcb sufficient material for automotive device 1oz double layer pcb at reasonable price with us and get the datasheet from our suppliers who can working for you.
Multi-layer HF Rogers PCB Sufficient Material In Automotive Device Application
Green solder mask,
white silk screen
Board thickness: 0.2mm
Copper thickness: 1OZ
High Tg, BT resins
Low Dk, Low Df Formulations
High Strength, Low CTE selections
Min Cladding 1 oz
Max Cladding 2 oz
Min Thickness .03mm (.0012)
RO4350B materials are proprietary woven glass reinforced hydrocarbon/ceramics with electrical performance close to PTFE/woven glass and the manufacturability of epoxy/ glass.
Providing tight control on dielectric constant and low loss while utilizing the same processing method as standard epoxy/glass, RO4350B is available at a fraction of the cost of conventional microwave laminates. No special through-hole treatments or handling procedures are required as with PTFE based microwave materials.
RO4350B materials are UL 94V-0 rated for active devices and high power RF designs.
RT/duroid 5880 high frequency laminates are PTFE composites reinforced with glass microfibers.The randomly oriented microfibers result in exceptional dielectric constant uniformity.
The dielectric constant of these high frequency laminates is the lowest of all products, and low dielectric loss make them well suited for high frequency/ broad band applications where dispersion and losses need to be minimized. Because of its extremely low water absorption characteristics, RT/duroid 5880 laminates are ideal for applications in high moisture environments.
RT/duroid 5880 laminates are easily cut, sheared and machined to shape, and resistant to all solvents and reagents normally used in etching printed circuits or plating edges and holes. RT/duroid 5870 and 5880 laminates have the lowest electrical loss of any reinforced PTFE material, low moisture absorption, are isotropic, and have uniform electrical properties over frequency.
RT/duroid 6002 microwave materials are a low dielectric constant laminate offering electrical and mechanical properties essential in designing complex microwave structures which are mechanically reliable and electrically stable.
The thermal coefficient of dielectric constant is extremely low from -55oC to+150oC (-67°F to 302°F) which provides the designers of filters, oscillators and delay lines the electrical stability needed in demanding applications.