Add: Bld 60, Zhongwu Industrial Park, Xixiang, Baoan, Shenzhen, Guangdong, China
High Frequency PCB Assembly One Stop Service Manufacturer Needed: 1. PCB gerber file. 2. BOM LIST FOR PCB ASSEMBLY. 3. Send us your sample pcb board or PCBA.(if you have sample) 4. Tell us your idea. Attention:Temperature: Reflow soldering；within 230°(rogers material) Wave soldering： within...
High Frequency PCB Assembly One Stop Service Manufacturer
1. PCB gerber file.
2. BOM LIST FOR PCB ASSEMBLY.
3. Send us your sample pcb board or PCBA.(if you have sample)
4. Tell us your idea.
Reflow soldering；within 230°(rogers material)
Wave soldering： within 230°(rogers material)
PCB PCBABasic info:
Base Material: Rogers,Taconic,Isola,Arlon
Min hole diameter: 0.1mm
Min line width/space: 3/3 mil
Board thickness: 1.0mm
Copper thickness:1 OZ
Surface Finish:Immersion gold
Layer: 12+ Layer
Special technical process: second laser drilling
Continuous process improvement:
Excellent impedance control
Measuring impedance 100% before shipment
Excellent board thickness control
Measuring board thickness 100% by laser after lamination;
Measuring board thickness 100% before shipment;
Inspection by AOI after Inner and outer layer
AVI for key products
Meet the various requirements of customers, we can purchase various brand IC, Resistor, Capicitor, Inductor etc.
3. PCB Assembly
SMT and Through-Hole Assembly Fine Pitch Placement
RoHS Compliance Assembly QFN and BGA Assembly
Turn-Key PCB Assembly BGA X-Ray Inspection
Prototype PCB Assembly AOI Testing
Low Volume PCB Assembly Functional Testing
SMT and DIP are integrated on the PCB board parts of the way,
the main difference is that SMT does not need to drill on the PCB,
the DIP pin in the need to insert the hole has been drilling holes.
SMT (Surface Mounted Technology)
Surface mount technology,
the main use of the placement machine is to install some small parts to the PCB board,
the production process: PCB board positioning, printing paste, placement machine placement,
back to the furnace and made of inspection. With the development of science and technology,
SMT can also be a number of large parts of the placement,
such as the motherboard can be mounted on some larger size parts.
SMT integration when the positioning and the size of parts is very sensitive,
in addition to the quality of solder paste and printing quality also play a key role.
DIP is the "plug-in", that is, in the PCB version of the insert parts,
At present the industry has manual plug-in and robot plug-in two ways to achieve,
the main production process: paste glue (to prevent tin plating should not have places),
plug-in, test, wave soldering, brush version (removed in the furnace The process of leaving the stain)
and made the test.