Add: Bld 60, Zhongwu Industrial Park, Xixiang, Baoan, Shenzhen, Guangdong, China
Product Details Key Specifications/Special Features: Type: Thick copper board Layer Count: 12 Finish Thickness: 3.2+0.229/-0.41mm Min Width: 2.54mm Min. Via dia: 1.5mm Surface Finish: ENIG Specialty: Inner layer copper thickness: 4OZ; outer layer copper thickness: 2OZ; Copper plating in Hole:...
Type: Thick copper board
Layer Count: 12
Finish Thickness: 3.2+0.229/-0.41mm
Min Width: 2.54mm
Min. Via dia: 1.5mm
Surface Finish: ENIG
Inner layer copper thickness: 4OZ; outer layer copper thickness: 2OZ; Copper plating in Hole: 50-100um
Small Orders Accepted
FR - 4 epoxy glass fiber cloth substrate, based on epoxy resin as binder, with electronic level glass fiber cloth as reinforcing material of substrate. Its bonding sheet and thin copper-clad r.p. panel and inner core is an important base material in production of multilayer printed circuit board,This kind of product is mainly used for double-sided PCB, dosage is very large. Epoxy glass fiber cloth substrate, the most widely used model for FR - 4, in recent years because of the electronic product installation technology and PCB technology development needs, appeared high Tg FR - 4 products.
Following are some types introduction for Rigid PCB and High Frequency PCB:
FR4 PCB(2layer,4 layer,multilayer)
F4B high frequency pcb board
Arlon high frequency pcb board
ISOLA high frequency pcb board
At the same time, we also provide corresponding PCBA services as our customer’s design and requirement.